Tailstock - Type 11
We are happy to offer you any type and shape of tailstock. Whether for a conventional lathe, a CNC lathe or e.g. as a counterpart for a rotary table on a CNC machining center.
Tell us the machine type, desired center height, required accuracy, maximum workpiece weight and the required quill travel and you will immediately receive an offer.
|
Type 11-1-1 |
Tailstock - direct driven |
|
|
We build classic tailstocks in all sizes and shapes for use when turning, milling or grinding.
We design the base to suit every machine geometry with prism, T-slot screw or THK guide carriage.
An additional intermediate piece is not required. |
For details click on picture
|
|
Type 11-1-2 |
Tailstock - gear driven |
|
|
A reduction gear on the quill drive can build up high axial forces.
Freely choose a gear ratio from 2:1 up to 50:1. |
For details click on picture
|
|
Type 11-1-3 |
Tailstock with digital force display |
|
|
Heating due to long processing times or special processing methods such as flame spraying and cladding can cause length changes to the component.
With our pressure & force indicator and the resilient length compensation you can easily get the process parameters under control. |
For details click on picture
|
|
Type 11-2 |
Tailstock - hydraulic or pneumatic driven quill |
|
|
By integrating a hydraulic cylinder into the quill, our hydraulic tailstocks are very short.
Quill drive via a pneumatic cylinder can also be implemented |
For details click on picture
|
|
Type 11-3 |
Precission Tailstock with height correction |
|
|
We offer various systems for fine adjustment of the center height on site. |
For details click on picture
|
|
